qPCR analysis for grad students and postdocs, on your own laptop

The plate finishes at six. The instrument PC is booked from seven. You copy the run file onto a USB stick and go home, then find that your Mac cannot open it. This page is about that evening.

If you run qPCR and analyse it yourself, the bottleneck is usually not the instrument but the one Windows PC with the analysis software on it. CycleView opens the original run file (QuantStudio .eds, LightCycler .ixo and .lc96p, Rotor-Gene .rex, or RDML) on your own Mac or Windows laptop. You get the curves, can reset threshold and baseline, run ΔΔCt with your reference genes and export a figure. The viewer is free; analysis and export are in Pro at $12 a month or $99 a year. The files never leave your computer.

The usual loop, and where it breaks

Most students go through the same steps after every run:

  1. Run the plate on the shared instrument.
  2. Export Cq values to CSV on the instrument PC, because there is no time to analyse there.
  3. Do ΔΔCt in a spreadsheet at home.
  4. Find an odd replicate, and realise the raw curve is back on the instrument PC.
  5. Book the PC again to look at one well.

Step 4 is where the week goes. Once you only have numbers, you cannot check a late Cq against its curve or a primer-dimer against its melt peak.

What changes when the run file comes home with you

Copy the original run file, not a CSV, and open it in CycleView:

  • Check the curves first. Every well's amplification curve on a log or linear axis, coloured by target or sample, with the melt curves one tab over.
  • Set Cq yourself. Move the threshold, change the baseline cycles, exclude a replicate, and see the Cq values update.
  • Run ΔΔCt. Pick your reference genes and calibrator group; replicates are averaged and the fold-change chart builds itself.
  • Export the figure. SVG for the paper or the thesis, PNG for lab meeting slides.

All of it works offline, on the train or at the kitchen table.

Your data stays on your computer

Unpublished data, data under a material transfer agreement, data your PI has not seen yet: none of it should go to a website you found in a search. CycleView runs locally. Files are opened from your disk and nothing is uploaded to a server.

Thesis-proof records

Two years from now, an examiner or a reviewer may ask how a Cq was obtained. Keep the original run file, and export RDML next to it: an open format that records the plate, the raw data and the analysis, readable by other tools. Your thesis appendix then points at something anyone can open, not a spreadsheet of numbers.

What it costs a student

Opening and viewing run files is free, for good. Pro, with adjustable threshold and baseline, ΔΔCt, figures and export, is $12 a month or $99 a year, so you can pay for the months you are writing up. If your group wants it for everyone, the Lab plan covers five people.

Take your run home tonight

Open the run file on your own Mac or PC. The viewer is free, and nothing is uploaded.

FAQ

Do I need the instrument software installed on my Mac?

No. CycleView reads the run file itself. You need the vendor software only to set up and run the plate on the instrument.

Which files should I copy off the instrument PC?

The original run file: .eds for QuantStudio, .ixo for LightCycler 480, .lc96p for LightCycler 96, .rex for Rotor-Gene Q, or an RDML export. A CSV of results loses the raw curves.

I use a Bio-Rad CFX. Can I still use it?

Bio-Rad .pcrd files are encrypted, so CycleView does not open them. Export RDML from CFX Maestro on the instrument PC and open that.

Can my results be used for a diagnosis?

No. CycleView is for research use, not for diagnosis.

qPCR guides